A team OSD favorite, the AMP200 is a high current 2-channel amp with loads of features. This amp lets you home run (directly to the back of the amp) two pairs of speakers or 4 speakers total. Since it's high current, you can add up to 4 pairs of speakers (8 speakers total) by adding OSD speakers selectors such as the DSM4. Rated at 80 Watts per channel at 8 ohms, the OSD-AMP200 is overload stable so it’s ideal for use anywhere clean power is needed. It also includes a dual source switching circuit. When you connect two independent sources number (say your iPod and a TV in another room) source one takes priority when it is active. When source one is turned off, source number two comes on. Note: You cannot play two sources simultaneously. For this feature you need a multi-channel amp like our MX1260. Step-up features rarely seen in amps of this price range include a built-in voltage meter, and front mounted volume and balance trim controls.
 

Specifications


Two sets of speaker outputs selectable from the front panel

2 stereo low-level (RCA) inputs and 1 high-level (speaker) input

80W per CH into 8 ohm loads with less than 0.2% THD+N

125W per CH into 4 ohm loads with less than 0.2% THD+N

200W per CH into 2 ohm loads with less than 0.2%THD+N

250W Bridged Mono into 8 ohms with less than 0.2% THD+N

Crosstalk: >65dB @ 1kHz, ref. to rated power into 8 ohms

Frequency Response: (20Hz to 20kHz)+0.0dB, -0.5dB

Signal to Noise ratio: -103dB ref. to rated power into 4 ohms

AC Power Consumption: 700W (all channels driven)

Dual Voltage 110/220V

Front-panel power switch

12-volt trigger

Auto-signal sensing function

<1W Standby Power Consumption


Write a review

Note: HTML is not translated!
    Bad           Good

OSD AMP200 High Current Class A/B 2 Channel Amplifier 350-Watt (2 Ohm stable) Bridged Mono 470-Watt

  • Product Code: AMP200
  • Availability: In Stock
  • $399.95
  • $339.00

  • Ex Tax: $339.00

Tags: OSD AMP300 High Current Class A/B 2 Channel Amplifier 350-Watt (2 Ohm stable) Bridged Mono 470-Watt